TENNIS COURT LINE MARKING PAINT
Product Description
A single fast drying easy to use long lasting tennis court line marking paint.
Intended Uses
Tennis court line marking is designed to reline tennis courts on Tarmac, Bitumen and Concrete surfaces.
Technical Information
Colour White Gloss Level Matt.
Permanent Volume Solids
Nominally 54%, varying slightly with colour.
Solids By Weight
Nominally 73%, varying slightly with colour.
Recommended Dry Film Thickness
Depends on environment and traffic density but a minimum of 150 microns is recommended.
Surface Preparation
DO NOT PAINT ON WET OR DAMP SURFACES. The surface must be clean and dry before applying coating to surface. Please ensure that the temperature is 15 or above before application. Do not apply if rainfall imminent.
Theoretical Coverage
5 litres will be sufficent to line a tennis court with 2” lines
Method of Application
Brush, Roller or Spray Drying Time
Drying Time
Touch Dry …….. 15 minutes
Hard Dry ………. 25 minutes
The above drying times are quoted at
Material Safety Data Sheet
or
20°C and will vary with the actual conditions such as; film thickness, air movement, temperature and humidity.
Shelf Life
12 months in original unopened containers, when stored under cover within the temperature range 5°C – 35°C. Mix thoroughly before use.
Packaging
5 litres.
Health & Safety
Familiarise yourself with before using this product.
If you need to obtain a copy, telephone us or download a copy from our website, by clicking here.
Application
Surface Preparation
The application surface should be dry and free from dust, oily and any other contaminants that might affect adhesion or performance.
It is recommended that asphalt and other similar surfaces be allowed to through harden for up to 6 months before painting.
Test trials should be carried out in the first instance on a small area.
Application conditions
In the case of synthetic surfaces (such as ‘all-weather’ sports pitches), existing line marking paint and other areas where appearance or performance is important, it is further recommended that test areas be coated to ensure good adhesion and/or compatibility with the
substrate/previously applied coatings.
Do not apply or dry when either the air or surface temperature is below 5 C or when there is mist, fog, high humidity, snow, when rain is imminent, or when the surface to be painted is wet with condensation or when condensation may occur during the drying period.
The surface temperature must be a minimum of C above dew point.
Preparation
Painting and drying should never be undertaken when the air temperature falls below the minimum temperature for the coating.
Cleaning
Clean all equipment immediately after use with water. Ensure that all lines, tips, etc are thoroughly flushed out.
Tennis Court DIY Supplies
Unit 15, Lowes Industrial Estate,
31 Ballynahinch Road, Carryduff,
Belfast BT8 8EH.
Tel: 00353 (1) 844 7008
Email: sales@tenniscourtdiysupplies.com
www.tenniscourtdiysupplies.com
